LABOM - Verkauf nach in Schweiz auf famaga.ch

CS2110-A1059-H11-N10-T30-K1085-K147-HY

CS2110 PRESSURE TRANSMITTER/PRESSURE SWITCH PASCAL CS for diaphragm seal operation, hygienic, see data sheet D4-017-42 A1 pressure sensor: piezoresistive for gauge pressure 059 measuring range 0...16 bar, overload limit 100 bar measuring accuracy: linearity, hysteresis, repeatability <= 0.2 % of span H11 output signal: 4...20 mA, 2-wire technology N10 switching output: without T30 electrical connection: circular connector M12x1 (4 pin) K1085 design: standard K147 process connection: clamp connection per DIN 32676, DN 40 / PN 25 material stainless steel mat.-no. 1.4404/1.4435 (316L) system filling: Synthetic oil, free of silicon FD1, FDA listed HY hygienic design per EHEDG Doc.8 and ASME BPE SF3: surface roughness (wetted parts) - turned parts Ra <= 0.76 μm - diaphragm Ra <= 0.38 μm - weld seam Ra <= 0.76 μm process temperature: -20...+125 °C, short term up to +140 °C, 1 h Custom-Tariff-No.: 90262020

Auf Anfrage

Preis anfragen

MZ1100-B901-W2002 CC6010-A1089-H1-T410 BH4210-A89 DL3230-HY06-A4007-L23-T14-W1020

Vacuummeter DN – 1; Material Body 1.4404 /1.4435(316L) ; Connection Type - clamp DIN 32676; Connection Dimension – D77.5 Ø63,5x1,65; Max.Press.bar(g) – 10; Max.Temp.°C – 250

Auf Anfrage

Preis anfragen

GA2730-A10-C3998-M2-N2-T150-Z52-W2002 HP1200-HY06-A25-B1412-E2100-G11-W1020 PA2430-F12-H1

GA2730 RESISTANCE THERMOMETER MiniTherm for installation in separate thermowell acc. to data sheet T4-017 A10 instrument connection: union nut M12x1 C3 temperature detecting element: ø 3 mm 998 insertion length l1: to suit thermowell M2 measuring insert: class A as per DIN 60751 N2 sensor type: 1 x Pt100, 3-wire technology T150 electrical connection: circular connector M12 x 1 (4 pins) Z52 incl. transmitter into st. steel plug housing with locking plug M12 (type PA2430) W2002 CALIBRATION PROTOCOL: with 5 measuring points HP1200 THERMOWELL, Type Series HP1200 acc. to data sheet T5-051 HY06 hygienic design: surface roughness (wetted parts) - turned parts Ra <= 0.6 µm - weld seam Ra <= 1.6 µm A25 instrument connection: M12x1 B1412 process connection: clamp connenction ø 50.5 mm DIN 32676 model A (metric) DN 25 / 32 / 40 DIN 32676 model B (OD, ISO) DN 21.3 / 26.9 / 33.7 / 42.4 DIN 32676 model C (inch, Tri-Clamp) 1" / 1 1/2" ISO 2852 DN 25 / 33.7 / 38 E2 thermowell diameter: ø 6 mm, reduced design to ø 4 mm 100 insertion length U1: 100 mm G11 material: stainless steel mat.-no. 1.4404 (316L) W1020 Components marked acc. to material inspection certificate per EN 10204-3.1, wetted parts PA243 TRANSMITTER for temperature (Pt 100), programmable see data-sheet T4-082-1 with circular connector M12x1 (4-pins) 0 design: standard F12 configuration: see below measuring range: 0...+150 °C error current if there is a sensor break 22.8 mA sensor offset: 0 °C, standard damping: 0 s, standard H1 output signal: 4...20 mA, standard Spare Part for serial no. 1511104/04/001

Auf Anfrage

Preis anfragen

FA2300-A2548-D1207-F6996

BIMETALLTHERMOMETER

Auf Anfrage

Preis anfragen

GA2500-A2310121-B40-D2-M22-N2-T11-Z1-W2002 PA2100-F12-H1

WIDERSTANDS-THERMOMETER Pt100 ohne Schutzrohr

Auf Anfrage

Preis anfragen

BH4200-A92-W2002

DL4100-HY06-A4007-L22-W4035-W1020 DRUCKMESSGERÄT mit Rohrfeder für Druckmittler

Auf Anfrage

Preis anfragen

BA4100-A58

BA acc. to data sheet D2-015 nominal case size: NS 63 41 case design: IP 65, process connection bottom 00 process connection: G 1/4 B A nominal range: 0...10 bar 58 accuracy: class 1.6 window: non-splintering glass

Auf Anfrage

Preis anfragen

CC6020-A1093-H1-T110-W4999 DE1180-A4001-L23-W4999

Druckmessumformer 1...24 bar

Auf Anfrage

Preis anfragen

BE4220-A2092-L4120-W2675

Bourdon tube pressure gauge with switch contact, chemical design acc. to data sheet D3-025 BE4 case: NS 100 per EN 837-1 S1 2 case design: IP 65 with case filling, process connection bottom 2 explosion protection: without 0 pressure connection: G 1/2 B A2 nominal range: -1...15 bar 092 switch contact: magnetic snap contact L4 switch function: 1 x max. closed- + 1 x max. open contact 120 electrical connection: connection plug with cable gland M20 x 1.5 and removable test cover, mat. Macrolon EAC-TR certification exemption statement - metrological certificate for the use in Russian Federation

Auf Anfrage

Preis anfragen

BR4201-A57.59-N4512.3-W4105-W5420 DL2100-A4007-L23-T63

Manometer 3-x Pin-DN25 (140003564) 3 Kontakt die Bewegung des Zeigers im Uhrzeigersinn: Die Handlung des ersten Kontakts: Schließer (1) Handlung der zweite Kontakt: Schliesser (1) Aktion Dritte Kontakt: öffner (2)

Auf Anfrage

Preis anfragen

FU2401-A2524-D20903-F12130-N4200-W4003-W5417

Kontaktthermometer 0 - 100°C G 3/4" AG 1 INDUKT. (140003575)

Auf Anfrage

Preis anfragen

CI4103-A1053.1-F1-H21-M21.1-Y12-T200-K1010

PRESSURE TRANSMITTER PASCAL Ci4 with threaded connection process connection back see data sheet D4-016-1 nominal range: -1...1 bar, Turndown max. 100:1, overload limit 20 bar; sensor type piezoresistiv measuring range setting: 0...1 bar accuracy: <= 0.10% from adjusted measuring span (Lin./Hys./Rep., up to Turndown <=5:1 no changes) parameterizing: standard, see data sheet output signal: 4...20 mA with HART high-resolution graphic display with backlight intuitive 4-button operation, quick access to device data available languages (English, German), default setting English material case: stainless steel mat. no. 1.4301/1.4305 (304/303) material front cover: stainless steel, window non-splittering glass degree of protection: IP 65 / IP 67 electrical connection: cable gland M 16 x 1.5, polyamide black, for cable ø 4.5-10 mm cable clamps: spring clip terminals up to 1.5 mm2 process connection: G 1/2 B per DIN EN 837-1 material wetted parts - sensor diaphragm, stainless steel mat. no. 1.4404/1.4435 (316L) - socket, stainless steel mat. no. 1.4404/1.4435 (316L)

Auf Anfrage

Preis anfragen

CS2110

CS2110-A1091-H11-N10-T30-K2085-K144-HY-W4020-W1020-W1102- W2002 PRESSURE TRANSMITTER/PRESSURE SWITCH PASCAL CS for diaphragm seal operation, hygienic, see data sheet D4-017-42 A1 pressure sensor: piezoresistive for gauge pressure 091 measuring range -1...9 bar, overload limit 100 bar measuring accuracy: linearity, hysteresis, repeatability <= 0.2 % of span H11 output signal: 4...20 mA, 2-wire technology N10 switching output: without T30 electrical connection: circular connector M12x1 (4 pin) K2085 design: with temperature decoupler K144 process connection: clamp connection per DIN 32676 model A, DN 25 / PN 25 material stainless steel mat.-no. 1.4404/1.4435 (316L) system filling: Synthetic oil, free of silicon FD1, FDA listed HY hygienic design per EHEDG Doc.8 and ASME BPE SF3: surface roughness (wetted parts) - turned parts Ra <= 0.76 μm - diaphragm Ra <= 0.38 μm - weld seam Ra <= 0.76 μm process temperature: -20...+160°C W4020 ADDITIONAL DESIGN: marking (adhesive label), see below W1020 Components marked acc. to material inspection certificate per EN 10204-3.1, wetted parts W1102 TEST REPORT per DIN EN 10204 2.2 as per customers specification, see below confirmation of FDA compliance of used system filling W2002 CALIBRATION PROTOCOL: with 5 measuring points

Auf Anfrage

Preis anfragen

CC6020

CC6020-A1091-H1-T110 DL4100-HY-A4007-L23-T61-W1020 CC6 PRESSURE TRANSMITTER COMPACT for diaphragm seal operation 02 design: with temperature decoupler 0 explosion protection: without A1 pressure sensor piezoresistive for gauge pressure 091 measuring range -1...9 bar, overload limit 60 bar measuring accuracy: linearity error incl. hysteresis < + 0.2 % f.s. accuracy of adjustment < +/- 0.2 % f.s. H1 output signal: 4...20 mA, 2-wire technology T110 electrical connection: right angle plug acc. to DIN EN 175301-803-A (DIN 43650, Form A), IP 65 DL DIAPHRAGM SEAL for food / pharmaceutical / biotechnology 4 design with clamp connection see data sheet D5-026 100 process connection: per DIN 32676 model A (metric) for pipes per DIN 11850, DN 25 / PN 25 HY hygienic design per EHEDG Doc.8 and ASME BPE SF3: surface roughness (wetted parts) - turned parts Ra <= 0.76 μm - diaphragm Ra <= 0.38 μm - weld seam Ra <= 0.76 μm A400 connection of meas. instrument directly welded 7 material wetted parts: stainless steel mat.-no. 1.4435 (316L) L23 system filling: Synthetic oil, free of silicon FD1 acc. to FDA 21 CFR 178.3570 / H1-registered T61 operating temperature range -10...+200°C W1020 Components marked acc. to material inspection certificate per EN 10204-3.1, wetted parts

Auf Anfrage

Preis anfragen

CA1110

CA1110-A3059-H1-T120-K144-HY-W1020-W1223 PRESSURE TRANSMITTER COMPACT ECOnomic for diaphragm seal operation, hygienic see data sheet D4-019-6 A3 pressure sensor thin film for gauge pressure 059 measuring range: 0...16 bar, overload limit 100 bar accuracy: Lin./Hyst./Repr. <= 0.5 % of the adjusted measuring range (standard) H1 output signal: 4...20 mA, 2-wire technology T120 electrical connection: circular connector M12 degree of protection: IP 65 (standard) K144 process connection: clamp connection DN 25 / PN 25, ø 50.5 mm per DIN 32676 model A for pipes per DIN 11850 material stainless steel ASTM 316L system filling: Synthetic oil, free of silicon FD1, FDA listed HY hygienic design per EHEDG Doc.8 and ASME BPE SF3: surface roughness (wetted parts) - turned parts Ra <= 0.76 μm - diaphragm Ra <= 0.38 μm - weld seam Ra <= 0.76 μm process temperature 0...+140 °C W1020 Components marked acc. to material inspection certificate per EN 10204-3.1, wetted parts W1223 INSPECTION CERTIFICATE DIN EN 10204 3.1 roughness height rating Ra

Auf Anfrage

Preis anfragen

GA2540-HY-A141066-C1222999- D2-M22-N2-T11-Z1-W4020-W1020-W2002 PA2100-F12-H1

Electronic temperature sensor GA2540

Auf Anfrage

Preis anfragen

CS2110-A1059-H11-N10-T30.1-K1085-K193

CS2110 PRESSURE TRANSMITTER/PRESSURE SWITCH PASCAL CS for diaphragm seal operation, hygienic, see data sheet D4-017-42 A1 pressure sensor: piezoresistive for gauge pressure 059 measuring range 0...16 bar, overload limit 100 bar measuring accuracy: linearity, hysteresis, repeatability <= 0.2 % of span H11 output signal: 4...20 mA, 2-wire technology N10 switching output: without T30.1 electrical connection: circular connector M12 x 1 (4 pin), pin connection: 1=(+) 2=(-) K1085 design: standard K193 process connection: screw-in thread G 1/2 A, incl. gasket material NBR flush mounted diaphragm with backup ring material stainless steel ASTM 316L system filling: Synthetic oil, free of silicon FD1, FDA listed process temperature: -20...+125 °C, short term up to +140 °C, 1 h

Auf Anfrage

Preis anfragen

GA9130-C201250-T11-Z1-W4020 PA2100-F12-H1

Temperaturfühler

Auf Anfrage

Preis anfragen

CX2001-A59

HOCHTEMPERATUR-DRUCKMESSUMFORMER

Auf Anfrage

Preis anfragen

CX2001-A64

Auf Anfrage

Preis anfragen

BE4301-A2057-N4500 DP1280-A3001-L11

DRUCKMESSGERÄT mit Rohrfeder und Schaltkontakt, Chemieausführung gemäß Datenblatt D3-025

Auf Anfrage

Preis anfragen

GA2700-A1010-C1200-G11-N2-T150

GA2700 RESISTANCE THERMOMETER measuring resistor: Pt 100, tolerances per class A per DIN EN 60751 A10 process connection: threaded connection 10 nominal width: G 1/2 B per DIN 3852 C1 temperature detecting element: ø 6 mm 200 insertion length U1: 200 mm G11 material wetted parts: stainless steel mat.-no. 1.4404 (316L) N2 measuring insert: 1 x Pt100, 3-wire technology, standard T150 electrical connection: circular connector M12 x 1 (4 pins)

Auf Anfrage

Preis anfragen

FA2600-A2524-D1207-F6080-W4020-W2002

FA BIMETAL THERMOMETER chemical design, stainless 2 steel case 600 case: NS 100 acc. to data sheet T2-025-1 case design: IP 66 with case filling, connection bottom A2 accuracy: per EN 13190, class 1 524 nominal range: 0...+100°C D12 process connection: shanks rotating 07 nominal width: G 1/2 F6 temperature detecting element: ø 6 mm 080 insertion length L1: 80 mm window: non-splintering glass W4020 ADDITIONAL DESIGN: marking (adhesive label), see below W2002 CALIBRATION PROTOCOL: with 5 measuring points

Auf Anfrage

Preis anfragen

GA2610-A4213-M23-N21-T11-Z1-W4020-W2004 PA2250-F12

GA261 RESISTANCE THERMOMETER Clamp-on technology for temperature measurement on pipes see data sheet T4-028 0 explosion protection: without A4 clamping element: for collar installation 213 for pipe external diameter: 21.3 mm M23 material insulating sleeve: temperature-resistant high performance plastics (-40...+150 °C) N21 measuring insert: 1 x PT 100, per DIN EN 60751 class A, 3-wire technology, fast operating T11 connection head: connection head rotatable model B, cap with 2 slotted screws, mat. aluminium, IP 54 electrical connection: M20x1.5 cable gland for cable ø 9-14 mm, material nickel-plated brass Z1 incl. transmitter: mounting of measuring insert (instead of terminal block) W4020 ADDITIONAL DESIGN: marking (adhesive label), see below W2004 CALIBRATION PROTOCOL: with 3 measuring points PA225 TRANSMITTER FOR TEMPERATURE head mounting for Pt 100, universal programmable acc. to data sheet T4-076 0 explosion protection: without F12 configuration: below signal input: Pt 100, 3-wire technology measuring range: 0...150 °C output signal: 4...20 mA; 2-wire technology break alarm 23 mA response time (damping): 1.0 s, standard

Auf Anfrage

Preis anfragen

BA4100-A89-W2002 DL8110-HY-D100-A3017-L22

Drucksensor Messbereich: -1...3 bar Spannung: 14...30 VDC Ausgang: 4...20mA

Auf Anfrage

Preis anfragen

CE6120-A1053-K1010-T110-H1

Pressure sensor

Auf Anfrage

Preis anfragen

GA2730-A10-C3028-M2-N2-T150-W4999-W4120-W2002.1

RESISTANCE THERMOMETER MiniTherm for installation in separate thermowell acc. to data sheet T4-017 GA2730 A10 instrument connection: union nut M12x1 C3 temperature detecting element: ø 3 mm 028 insertion length l1: 28 mm M2 measuring insert: class A as per DIN 60751 N2 sensor type: 1 x Pt100, 3-wire technology T150 electrical connection: circular connector M12 x 1 (4 pins) W4999 ADDITIONAL DESIGN: see below EAC-TR Declaration of non-certification W4120 ADDITIONAL DESIGN: marking, by laser, see below W2002 CALIBRATION PROTOCOL: with 5 measuring points .1 calibrated range: 0...150°C

Auf Anfrage

Preis anfragen

GA2730-A50-C3098-M2-N2-T150-W4999-W4120-W2002.1

RESISTANCE THERMOMETER MiniTherm for installation in separate thermowell acc. to data sheet T4-017 GA2730 A50 instrument connection: union nut G 3/8 C3 temperature detecting element: ø 3 mm 098 insertion length l1: 98 mm M2 measuring insert: class A as per DIN 60751 N2 sensor type: 1 x Pt100, 3-wire technology T150 electrical connection: circular connector M12 x 1 (4 pins) W4999 ADDITIONAL DESIGN: see below EAC-TR Declaration of non-certification W4120 ADDITIONAL DESIGN: marking, by laser, see below W2002 CALIBRATION PROTOCOL: with 5 measuring points .1 calibrated range: 0...150°C

Auf Anfrage

Preis anfragen

GA2730-A50-C3037-M2-N2-T150-W4999-W4120-W2002.1

RESISTANCE THERMOMETER MiniTherm for installation in separate thermowell acc. to data sheet T4-017 GA2730 A50 instrument connection: union nut G 3/8 C3 temperature detecting element: ø 3 mm 037 insertion length l1: 37 mm M2 measuring insert: class A as per DIN 60751 N2 sensor type: 1 x Pt100, 3-wire technology T150 electrical connection: circular connector M12 x 1 (4 pins) W4999 ADDITIONAL DESIGN: see below EAC-TR Declaration of non-certification W4120 ADDITIONAL DESIGN: marking, by laser, see below W2002 CALIBRATION PROTOCOL: with 5 measuring points .1 calibrated range: 0...150°C

Auf Anfrage

Preis anfragen

CV3110-A1059.1-F80-H1100-M2-N10-T30-K1085-W4022-W2002-W26 74 DL3330-HY-A4007-L22-W4035-W1020

PRESSURE TRANSMITTER PASCAL CV, for diaphragm seal operation, hygienic acc. to data sheet D4-017/22 CV3110 A1 pressure sensor: piezoresistive for gauge pressure 059.1 nominal range: -1...16 bar, overload limit 60 bar measuring range setting: turndown 5:1 accuracy: <= 0.15% of measuring span (linearity, hysteresis and repeatability) F80 measuring range: setting see below lower range value: - 1,000 upper range value: + 6,000 unit: bar H11 output signal: 4...20 mA, rising characteristic (standard) 0 setting damping: 0.0 sec. (standard) 0 setting alarm state: < 3.6 mA (standard) display module: multifunctional display with 5-position digital display and bar graph, pluggable M2 N10 switching module: without case: hygienic housing design with screw cap material: stainless steel degree of protection: IP 66 T30 electrical connection: circular connector M12x1 (4 pin) K1085 design standard ADDITIONAL DESIGN: stainless steel Tag-plate with stainless steel wire marking see below W4022 W2002 CALIBRATION PROTOCOL: with 5 measuring points W2674 EAC-TR certification exemption statement DL DIAPHRAGM SEAL for food / pharmaceutical / biotechnology design with clamp connection see data sheet D5-026 3 process connection: per DIN 32676 model C (Tri-Clamp) for pipes per ASME BPE, DN 2" / PN 16 330 hygienic design per EHEDG Doc.8 and ASME BPE SF3: surface roughness (wetted parts) - turned parts Ra <= 0.76 μm - diaphragm Ra <= 0.38 μm - weld seam Ra <= 0.76 μm HY A400 connection of meas. instrument directly welded 7 material wetted parts: stainless steel mat.-no. 1.4435 (316L) system filling: Synthetic oil, free of silicon FD1 acc. to FDA 21 CFR 178.3570 / H1-registered design temperature process +10...+140 °C L22 W4035 ADDITIONAL DESIGN: wetted parts electropolished W1020 Components marked acc. to material inspection certificate per EN 10204-3.1, wetted parts

Auf Anfrage

Preis anfragen

Verkauf jedes Produkts aus dem LABOM Katalog zu guten Preisen

LABOM – seite 4

Verkauf jedes Produkts aus dem LABOM Katalog zu guten Preisen

Hier können Sie Produkte anderer Marken kaufen

Verkauf jedes Produkts aus dem LABOM Katalog zu guten Preisen

LABOM – seite 4

Verkauf jedes Produkts aus dem LABOM Katalog zu guten Preisen

Hier können Sie Produkte anderer Marken kaufen

Hinterlassen Sie Ihre Anfrage